Sell Air Jet Aerator tradenote.net

Sell Offers

Sell Air Jet Aerator (November 10, 2006)
Product Name: Air Jet AeratorModel Number: SL-1.5Place of Origin: ChinaFeatures: 1) Suitable for water depth over 2m culturing farm pond to aerated the bottom water, which has high oxygen supplement, purification of water 2) Under the high density culturing farm, the effect for the oxygen supplement would be better if it could be used together with our paddle wheel aerator at the same time 3) Can adjust the jet angle and suitable for the culturing farm pond of the different depth of water 4) The whole machine adopt the engineering plastic and the stainless steel, which has high durable, intensity quality, resist acid-alkalinity, sun exposure and salt water and sea water 5) Few spare parts, easy assembly and maintenance, long lifespan 6) Also suitable for the industrial waste water treatment 7) Can be specially devised according to customer's requirements, and the biggest power can come up to 22kW 8) Lightweight, small measure, low noise, easy installation and convenient to operate Outer packing: Carton
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Paddle Wheel Aerator (November 5, 2006)
Product Name: Paddle Wheel AeratorModel Number: SC-2.2Place of Origin: ChinaFeatures: 1) Actual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models 2) The accrual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity 3) A mechanical seal is available to prevent oil leakage 4) Inside protectors are available to avoid the motor being accidentally burnt out 5) PE floats, nylon impellers, and stainless steel shafts and frames are available 6) Our paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames 7) In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard 8) With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard, power efficiency is 1.71kg (O2)/kWh, 36.8% higher than the standard Packing: Carton
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Single Float Injector Aerator (STL-0.75, STLD-0.75.STL-1.1) (November 1, 2006)
Product Name: Single Float Injector Aerator (STL-0.75, STLD-0.75.STL-1.1)Place of Origin: ChinaOur injector aerators are electrically operated products with suction from the surface used to introduce air or oxygen beneath the surface of the water. Injector aerators produce a flow of water that creates pressure drop able to draw air or oxygen through the support and regulation pipes and disperse them as very fine bubbles in the propeller's turbulence. Features: 1) Small and lightweight, little noise, easy to install 2) Can be submerged to several depths 3) Can create a horizontal flow model, tilted at 60o ~ -60o to the surface of the water 4) Suitable for settling all types of plant water and environmental use water
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Paddlewheel Aerator (SC-1.5) (November 1, 2006)
Product Name: Paddlewheel Aerator (SC-1.5)Place of Origin: ChinaOur paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames. In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard. With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard,power efficiency is 1.71kg (O2)/KWh, 36.8% higher than the standard. Features: 1) Arcual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models. 2) The arcual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity. 3) A mechanical seal is available to prevent oil leakage. 4) Inside protectors are available to avoid the motor being accidentally burnt out. 5) PE floats, nylon impellers, and stainless steel shafts and frames are available.
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Paddlewheel Aerator (SC-0.75, SC-0.49) (November 1, 2006)
Product Name: Paddlewheel Aerator (SC-0.75, SC-0.49)Place of Origin: ChinaOur paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames. In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard. With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard,power efficiency is 1.71kg (O2)/KWh, 36.8% higher than the standard. Features: 1) Arcual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models. 2) The arcual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity. 3) A mechanical seal is available to prevent oil leakage. 4) Inside protectors are available to avoid the motor being accidentally burnt out. 5) PE floats, nylon impellers, and stainless steel shafts and frames are available.
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Splash Aerator py-0.55 (November 1, 2006)
Splash aerator is made of Stainless Steel Water proofed motor and high intensity plastics, which have the good corrosion resistance. The mechanical sealed-water proofing motor will floating above the water level when it is out of working. And it will lower the possibility of the water intake for the damaged the motor seal in case, so it has long life span. The stainless steel motor is in the channel of the splashed water, which has excellent cooling effect automatically when it is working. The water pipe can be lengthened expediently according to the practical situation and also can available for the deep-water pond. Such kind of aerator is light and easily installed. It is mainly used in fish, shrimp, eel pools and other special aquatic ponds. The splash aerators running the water upwards, as the fountain does, so it can increase the arrtactive of lake, pool and the view of the park. The mainly characteristic: 1. Stainless steel water proofed motor, water-cooling automatically, high-efficiency. 2. The whole parts we adopt are the corrosion resistant materials. Long life span. 3. Light, flexible and easy to operate 4. Available for oxygen-increasing in deep water 5. Active screw impeller can save the energy efficiently.
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Paddlewheel Aerator (SC-2.2) (November 1, 2006)
Product Name: Paddlewheel Aerator (SC-2.2)Place of Origin: ChinaOur paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames. In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard. With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard,power efficiency is 1.71kg (O2)/KWh, 36.8% higher than the standard. Features: 1) Arcual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models. 2) The arcual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity. 3) A mechanical seal is available to prevent oil leakage. 4) Inside protectors are available to avoid the motor being accidentally burnt out. 5) PE floats, nylon impellers, and stainless steel shafts and frames are available.
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Spraying Aerator (November 1, 2006)
Product Name: Spraying AeratorPlace of Origin: ChinaThis floating pump becomes a spraying aerator when a spray nozzle is connected. Tested by the National Technology Supervision Bureau, this product's oxygenating capability and power efficiency exceed the National Agriculture Department standard(by about 60%). It can also be used for irrigation when the spray nozzle is removed (without using any additional tools). Features: 1) Two purposes, low cost 2) Lightweight, flexible and convenient 3) Low noise and non-oil convenient 4) Applicable for single-phase power sources Spraying aerator (floating pump for oxygen increase and irrigation) size and working performance table: Note 1: complete set of oxygen increaser includes floating pump, nozzle and connector Note 2: the exterior fastener of the floating pump is stainless steel Oxygenation & Irrigation Floating Pump (only for 220V/60Hz, 110V/60Hz)
[Related Categories: Aquaculture Equipment & Supplies ]
[Related Keywords: None ]

Sell Paddle Wheel Aerator (November 10, 2006)
Product Name: Paddle Wheel AeratorModel Number: SC-1.5Place of Origin: ChinaOur paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames. In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard. With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard, power efficiency is 1.71kg (O2)/kWh, 36.8% higher than the standard. Features: 1) Actual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models 2) The actual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity 3) A mechanical seal is available to prevent oil leakage 4) Inside protectors are available to avoid the motor being accidentally burnt out 5) PE floats, nylon impellers, and stainless steel shafts and frames are available Packing: Carton
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Paddle Wheel Aerator (November 5, 2006)
Product Name: Paddle Wheel AeratorModel Number: SC-0.75, SC-0.49Place of Origin: ChinaOur paddle wheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames. In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching to the SC/T6017-1999 standard. Features: 1) Arcuate-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models 2) The arcuate-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity 3) A mechanical seal is available to prevent oil leakage 4) Inside protectors are available to avoid the motor being accidentally burnt out 5) PE floats, nylon impellers, and stainless steel shafts and frames are available 6) With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard, power efficiency is 1.71kg (O2)/kWh, 36.8% higher than the standard Outer packing: Carton
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Paddlewheel Aerator (SC-1.5, SC-0.75) (November 1, 2006)
Product Name: Paddlewheel Aerator (SC-1.5, SC-0.75)Place of Origin: ChinaOur paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames. In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard. With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard, power efficiency is 1.71kg (O2)/KWh, 36.8% higher than the standard. Features: 1) Arcual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models. 2) The arcual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity. 3) A mechanical seal is available to prevent oil leakage. 4) Inside protectors are available to avoid the motor being accidentally burnt out. 5) PE floats, nylon impellers, and stainless steel shafts and frames are available.
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Double Float Injector Aerator (TL-1.1) (November 1, 2006)
Product Name: Double Float Injector Aerator (TL-1.1)Place of Origin: ChinaOur injector aerators are electrically operated products with suction from the surface used to introduce air or oxygen beneath the surface of the water. Injector aerators produce a flow of water that creates pressure drop able to draw air or oxygen through the support and regulation pipes and disperse them as very fine bubbles in the propeller's turbulence. Features: 1) Small and lightweight, little noise, easy to install 2) Can be submerged to several depths 3) Can create a horizontal flow model, tilted at 60o ~ -60o to the surface of the water 4) Suitable for settling all types of plant water and environmental use water
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Impeller Aerator(YL-3) (November 1, 2006)
Product Name: Impeller Aerator(YL-3)Place of Origin: ChinaThrough deep investigation of feedback information concerning impeller aerator quality,we have developed an impeller aerator that is designed to avoid engine burn out and gear damage. Features: 1) Built-in protector will jump off automatically so as not to burn down the engine if the lack phase of tri-phase source or engine overheating occurs. 2) The gear is made using chromium-manganese-titanium alloy steel immersed in carbon and nitrogen, which can prolong the life span. 3) Using a patented technique, the non-welded impeller can run stably, and is easy to carry around. 4) To ensure permanent application under strongly corrosive conditions (seawater or industrial sewage) without replacing the impeller or painting, we have developed engineering plastic impellers and stainless steel impellers according to different environments and customers' special requirements.
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Paddle Wheel Aerator (November 1, 2006)
Our paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames. In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard. With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard, power efficiency is 1.71kg (O2)/kWh, 36.8% higher than the standard. Features: 1) Actual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models 2) The actual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity 3) A mechanical seal is available to prevent oil leakage 4) Inside protectors are available to avoid the motor being accidentally burnt out 5) PE floats, nylon impellers, and stainless steel shafts and frames are available Packing: Carton
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Air Jet Aerator (November 1, 2006)
Features: 1) Suitable for water depth over 2m culturing farm pond to aerated the bottom water, which has high oxygen supplement, purification of water 2) Under the high density culturing farm, the effect for the oxygen supplement would be better if it could be used together with our paddlewheel aerator at the same time 3) Can adjust the jet angle and suitable for the culturing farm pond of the different depth of water 4) The whole machine adopt the engineering plastic and the stainless steel, which has high durable, intensity quality, resist acid-alkalinity, sun exposure and salt water and sea water 5) Few spare parts, easy assembly and maintenance, long life span 6) Also suitable for the industrial waste water treatment 7) Can be specially devised according to customer's requirements, and the biggest power can come up to 22kW 8) Light weight, small measure, low noise, easy installation and convenient to operate
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Impeller Aerator (October 31, 2006)
Product Name: Impeller AeratorModel Number: YL-3Place of Origin: ChinaThrough deep investigation of feedback information concerning impeller aerator quality, we have developed an impeller aerator that is designed to avoid engine burn out and gear damage. Features: 1) Built-in protector will jump off automatically so as not to burn down the engine if the lack phase of tri-phase source or engine overheating occurs 2) The gear is made using chromium-manganese-titanium alloy steel immersed in carbon and nitrogen, which can prolong the life span 3) Using a patented technique, the non-welded impeller can run stably, and is easy to carry around 4) To ensure permanent application under strongly corrosive conditions (seawater or industrial sewage) without replacing the impeller or painting, we have developed engineering plastic impellers and stainless steel impellers according to different environments and customers' special requirements
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Double Float Injector Aerator (October 26, 2006)
Product Name: Double Float Injector AeratorModel Number: TL-1.1Place of Origin: ChinaOur injector aerators are electrically operated products with suction from the surface used to introduce air or oxygen beneath the surface of the water. Injector aerators produce a flow of water that creates pressure drop able to draw air or oxygen through the support and regulation pipes and disperse them as very fine bubbles in the propeller's turbulence. Features: 1) Small and lightweight, little noise, easy to install 2) Can be submerged to several depths 3) Can create a horizontal flow model, tilted at 60o ~ -60o to the surface of the water 4) Suitable for settling all types of plant water and environmental use water
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Paddle Wheel Aerator (October 21, 2006)
Product Name: Paddle Wheel AeratorModel Number: SC-1.5, SC-0.75Place of Origin: ChinaFeatures: 1) Actual-bevel gears are used instead of worm gears, thereby economizing on energy with high efficiency, and saving over 20% electric energy over traditional models 2) The accrual-bevel gear is made of chromium-manganese-titanium with carbon-nitride surface treatment. This ensures long usage life spans and high rigidity 3) A mechanical seal is available to prevent oil leakage 4) Inside protectors are available to avoid the motor being accidentally burnt out 5) PE floats, nylon impellers, and stainless steel shafts and frames are available 6) Our paddlewheel aerators are greatly improved and produced according to the newest international technologies. Adopting whole plastic floats, these aerators have stainless steel transmission shafts and frames 7) In April 2000, these products were examined by the China Fishery Machinery Instruments Equality Supervision Center. All 9 models were evaluated as reaching the SC/T6017-1999 standard 8) With oxygen transfer rates of 2.59kg (O2)/h, 36.3% higher than the standard, power efficiency is 1.71kg (O2)/kWh, 36.8% higher than the standard Packing: Carton
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Single Float Injector Aerator (October 16, 2006)
Product Name: Single Float Injector AeratorModel Number: STL-0.75, STLD-0.75, STL-1.1Place of Origin: ChinaOur injector aerators are electrically operated products with suction from the surface used to introduce air or oxygen beneath the surface of the water. Injector aerators produce a flow of water that creates pressure drop able to draw air or oxygen through the support and regulation pipes and disperse them as very fine bubbles in the propeller's turbulence. Features: 1) Small and lightweight, little noise, easy to install 2) Can be submerged to several depths 3) Can create a horizontal flow model, tilted at 60o (60o to the surface of the water) 4) Suitable for settling all types of plant water and environmental use water Packing: Carton
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Splash Aerator (October 11, 2006)
Product Name: Splash AeratorModel Number: PY-0.55Place of Origin: ChinaFeatures: 1) Stainless steel waterproofed motor, water-cooled automatically, high efficiency 2) Adopts corrosion resistant materials, long life span 3) Light, flexible and easy to operate 4) Available for oxygen increasing in deep water 5) Active screw impeller can save the energy efficiently 6) Mainly used for fish, shrimp, eel pools and other special aquatic ponds Outer packing: Cartons
[Related Categories: Water Treatment ]
[Related Keywords: None ]

Sell Air Blower (November 10, 2006)
Product Name: Air BlowerModel Number: GD-0.75Place of Origin: ChinaSpecial instructions of the portable air blower: Our new lightweight, faster drying with 3-speed portable air blower is not only the ideal for drying the floor, carpet, wall, ceiling and upholstery cleaning jobs, but also suitable for the moisture control need in factories and hotels. Special characters for the portable air blower: 1) Easy installation: simply choose an angle of airflow, select a speed, plug into standard outlet, and let the Portable Air Blower dry your area with moisture control need 2) Three speed switch and three angle adjustment can adjust the air flow, operate easily and flexible 3) Rotocast polyethylene housing protects the inside spare part from damaging. Safety, durable and long life span 4) Molded in lift handle and the idler wheel makes it more convenient, flexible to move and store 5) Low noise level at the highest speed 6) Reasonable design of the idler wheel makes larger air flow and improves the efficiency and saves the energy efficiently 7) The outlook design is artistic, dexterous, reasonable and stackablility
[Related Categories: Garden Tools & Equipment ]
[Related Keywords: None ]

Sell Air Blower (November 1, 2006)
Features: 1) 24V LED lights with side marker 2) Working voltage: 12 or 24V 3) Available in various colors 4) With water-resistant Special instructions of the portable air blower: Our new lightweight, faster drying with 3-speed portable air blower is not only the ideal for drying the floor, carpet, wall, ceiling and upholstery cleaning jobs, but also suitable for the moisture control need in factory, hotel and so on. Special characters for the portable air blower: 1) Easy installation: simply choose an angle of airflow, select a speed, plug into standard outlet, and let the Portable Air Blower dry your area with moisture control need 2) Three speed switch and three angle adjustment can adjust the air flow, operate easily and flexible 3) Rotocast polyethylene housing protects the inside spare part from damaging. Safety, durable and long life span 4) Molded in lift handle and the idler wheel makes it more convenient, flexible to move and store 5) Low noise level at the highest speed 6) Reasonable design of the idler wheel makes larger air flow and improves the efficiency and saves the energy efficiently 7) The outlook design is artistic, dexterous, reasonable and stackablility
[Related Categories: Garden Tools & Equipment ]
[Related Keywords: None ]

Sell Floating Pump (November 13, 2006)
Product Name: Floating PumpPlace of Origin: ChinaIn 1987, the world's first floating pump was successfully invented in Taizhou by the Jinqing Pump Factory. Having become very popular in China, these items are being exported to numerous countries around the world. These pumps float on the water, rising and falling according to the water level. With good quality, they have such features as easy operation, saving energy, long life, etc. While submerged pumps are damaged by sand in the bottom of river, floating pumps completely solve this problem. Features: 1) Easy operation: a pump station needn't be built to pump in water. Just place this pump in the water and turn on the switch, and then it will inhale water. Not being influenced by rain or other water, its light weight ensures easy portability. 2) Saves energy: by changing absorption lift into pressure lift, the intake of different types of floating pumps will always be 25 - 50cm below the water level.Being in the most suitable position for inhaling water, it shortens the pipe and doesn't need a bottom valve; meanwhile saving electricity by 10 - 30%. 3) Long life: the axle seal won't be influenced by sand on the bottom of the river,or sink into the sand. 4) Efficiency in agriculture: the temperature of water the floating pump inhales is much higher than water on the river bottom, which makes crops grow much faster. For example, it can make rice ripen earlier than usual, and raise yield output. Floating pump size and working performance table
[Related Categories: Pumps & Vacuum Equipment ]
[Related Keywords: None ]

Sell Spraying Aerator (November 15, 2006)
Product Name: Spraying AeratorPlace of Origin: ChinaThis floating pump becomes a spraying aerator when a spray nozzle is connected. Tested by the National Technology Supervision Bureau, this product's oxygenating capability and power efficiency exceed the National Agriculture Department standard (by about 60%). It can also be used for irrigation when the spray nozzle is removed (without using any additional tools). Features: 1) Dual purpose, low cost 2) Lightweight, flexible and convenient 3) Low noise and non-oil convenient 4) Applicable for single-phase power sources Spraying aerator (floating pump for oxygen increase and irrigation) size and working performance table: 1) Note 1: complete set of oxygen increaser includes floating pump, nozzle and connector 2) Note 2: the exterior fastener of the floating pump is stainless steel 3) Oxygenation and irrigation floating pump (only for 220V/60Hz, 110V/60Hz) Packing: carton
[Related Categories: Pumps & Vacuum Equipment ]
[Related Keywords: None ]

Sell Floating Pumps (November 10, 2006)
Product Name: Floating PumpsPlace of Origin: ChinaFeatures: 1) Easy operation: a pump station needn't be built to pump in water. Just place this pump in the water and turn on the switch, and then it will inhale water. Not being influenced by rain or other water, its light weight ensures easy portability 2) Saves energy: by changing absorption lift into pressure lift, the intake of different types of floating pumps will always be 25 - 50cm below the water level. Being in the most suitable position for inhaling water, it shortens the pipe and doesn't need a bottom valve. Meanwhile, it saves electricity by 10 - 30% 3) Long life: the axle seal won't be influenced by sand on the bottom of the river, or sink into the sand 4) Efficiency in agriculture: the temperature of water the floating pump inhales is much higher than water on the river bottom, which makes crops grow much faster. For example, it can make rice ripen earlier than usual, and raise yield output 5) In 1987, the world's first floating pump was successfully invented in Taizhou by us. Having become very popular in China, these items are being exported to numerous countries around the world 6) These pumps float on the water, rising and falling according to the water level. With good quality, they have such features as easy operation, saving energy and long life. While submerged pumps are damaged by sand in the bottom of river, floating pumps completely solve this problem Floating pump size and working performance table: Outer packing: Carton
[Related Categories: Pumps & Vacuum Equipment ]
[Related Keywords: None ]